 | Enerpac Hydraulic Power Workholding No. STRS21, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: STRS-21
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$301.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: SURS-51
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$430.00 |
 | Enerpac Hydraulic Power Workholding Rest Button No. B3328, 8-32 thds., .28 Lg. (1 Each)
Brand: Reid Supply Company Part Number: B332-8 | *$18.50 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. WVP-5 (1 Each)
Brand: Reid Supply Company Part Number: WVP-5
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi." | *$406.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18131ST (1 Each)
Brand: Reid Supply Company Part Number: CTS18131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18251ST (1 Each)
Brand: Reid Supply Company Part Number: CST18251
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$140.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each)
Brand: Reid Supply Company Part Number: TS-2131ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$82.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-4191ST (1 Each)
Brand: Reid Supply Company Part Number: TS4191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$91.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-471ST (1 Each)
Brand: Reid Supply Company Part Number: TS-471ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$89.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9191ST (1 Each)
Brand: Reid Supply Company Part Number: TS-9191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$92.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9251ST (1 Each)
Brand: Reid Supply Company Part Number: TS-9251ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$108.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9381ST (1 Each)
Brand: Reid Supply Company Part Number: CST-9381
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each)
Brand: Reid Supply Company Part Number: TS-971ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$83.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap. = 2,600 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-122
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-202, Use w/cap. = 3,900 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-202
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$97.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap. = 500 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-52, Use w/cap. = 1,250 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAL-52
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$63.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-121, Use w/cap. = 2,600 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAS-121
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$53.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap. = 1,250 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-1, M = 1 7/8-16 (1 Each)
Brand: Reid Supply Company Part Number: SC-1
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket." | *$687.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-4, M = 3/4-16
Brand: Reid Supply Company Part Number: SC-4
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket." | *$9.30 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-3002SB (1 Each)
Brand: Reid Supply Company Part Number: PACG-3002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$712.00 |
| Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-5002SB (1 Each)
Brand: Reid Supply Company Part Number: PACG5002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$646.00 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PAMG-5402NB (1 Each)
Brand: Reid Supply Company Part Number: PAMG-5402NB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$1,051.00 |
 | Enerpac Hydraulic Power Workholding Work Support, Spring Advanced, No. WSL-111 (1 Each)
Brand: Reid Supply Company Part Number: WSL-111
Work supports provide additional support to avoid excessive movement or deflection of the workpiece during machining. When hydraulic pressure is applied to the work support, a piston pushes against an internal adjustable spring that advances the work support plunger against a workpiece at the force set by the adjustable spring. As more hydraulic pressure is applied, an internal sleeve will grip and lock the plunger in that position. Available as a spring or fluid advance unit. The spring advanced unit can be converted to air by simply removing the internal adjustment spring and attaching a low pressure air line to the air breather vent tube. Operating pressure is 700 psi minimum, 5,000 psi maximum." | *$207.00 |
 | Enerpac P-142 Two Speed 10,000 psi Light Weight Hydraulic Hand Pump
Brand: Enerpac
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbr1st Stage Oil Displacement/Stroke: .221 Cubic Inchesbr1st Stage Pressure Rating: 200 psibr2nd Stage Oil Displacement/Stroke: .055 Cubic Inchesbr2nd Stage Pressure Rating: 10,000 psibrMax Handle Effort: 78 lbsbrUsable Oil Capacity: 20 Cubic Inchesbr | *$289.95 |
 | Enerpac RC-102 10 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-102 Part Number: RC-102
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 4.78"brCylinder Capacity: 10 TonsbrCylinder Effective Area: 2.23 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 4.75 Cubic InchesbrStroke: 2.13"brWeight: 5.1 lbsbr | *$249.00 |
 | Enerpac RC-106 10 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-106 Part Number: RC-106
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 9.75"brCylinder Capacity: 10 TonsbrCylinder Effective Area: 2.23 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 13.67 Cubic InchesbrStroke: 6.13"brWeight: 9.8 lbsbr | *$299.00 |
 | Enerpac RC-256 25 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-256 Part Number: RC-256
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 10.75"brCylinder Capacity: 25 TonsbrCylinder Effective Area: 5.15 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 32.19 Cubic InchesbrStroke: 6.25"brWeight: 22 lbsbr | *$689.00 |
 | Enerpac RCS-502 50 Ton Single Acting Low Height Hydraulic Cylinder
Brand: Enerpac
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 4.81"brCylinder Capacity: 50 TonsbrCylinder Effective Area: 9.63 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 22.91 Cubic InchesbrStroke: 2.38"brWeight: 24 lbsbr | *$655.00 |
 | Fast Barn Framing Kit
Brand: Northern Tool Equipment
You use straight-cut 2 x 4s throughout. No angles to cut! No lost time! Your barn goes up lightning fast, because the galvanized steel bases and angle brackets make framing do-it-yourself easy. Kit includes 12 base plates and 40 angle brackets. Angle brackets speed attaching studs to rafters and rafters to ridgepole. | *$69.99 |
 | FERNCO, INC. P1056-54 FLEXIBLE COUPLING 5x4"
Brand: Fernco Model: P1056-54 Part Number: P1056-54
"FERNCO" FLEXIBLE COUPLING
Used to connect the plain ends of pipe
Each coupling is supplied with Series 300 stainless steel clamps
1/Bulk | *$20.99 |
 | FFP06-06F , Hydraulic Flush Face Plug, 2-Way Shut-Off, 3/8 in. Female Pipe Thread
Brand: Foster Manufacturing | *$16.00 |
| FFS06-06 , Hydraulic Flush Face Socket, 2-Way Shut-Off, 3/8 in. Female Pipe Thread
Brand: Foster Manufacturing | *$40.00 |
| FFS06-08 , Hydraulic Flush Face Socket, 2-Way Shut-Off, 1/2 in. Female Pipe Thread
Brand: Foster Manufacturing | *$41.60 |
 | Filler Strainer Breather Cap Assembly
Brand: Northern Tool Equipment
1/4 turn bayonet style filler-breather cap with chain. Includes 40 micron breather cap filter, 15 micron strainer basket, gaskets and hardware. | *$12.99 |
 | Filter Strainer Breather Cap - 3in. Dia.
Brand: Northern Tool Equipment
Use this to fill hydraulic reservoirs. Allows up to 200 GPM or 26.7 CFM air flow. Keeps reservoir clean. Nickel-chrome plated cap. 5 1/4in. from top to bottom, cap is 3in. diameter. | *$12.99 |
 | Flow Meter
Brand: Northern Tool Equipment
Will handle up to 30 GPM at 5000 PSI. 4% FDS accuracy. Large 2 1/2in. direct read dial. Can be mounted horizontal or vertical. 3/4in. in and out ports. Comes with 1/4in. port to mount pressure gauge. Use on pressure or return line. Measures in GPM. | *$299.99 |
 | Flow Meter With Thermometer
Brand: Northern Tool Equipment
Handles up to 32 GPM at 6000 PSI. Includes 180deg F thermometer. Otherwise, similar to #2048. | *$319.99 |
 | Gas Valve 1/2"
Brand: Anchor | *$5.50 |
 | Gas Valves 1/2
Brand: Anchor | *$3.99 |
| Gas Valves 3/4
Brand: Anchor | *$5.99 |
 | Gauge Dampener - 1/4in. Size
Brand: Northern Tool Equipment
Used with 4in. gauges. | *$3.99 |
 | Grease Nipple Assortment Kit Standard SAE 110pc NEW
Brand: BE
Grease nipple assortments put commonly found grease nipples at your fingertips in a handy grab pack, reducing the amount of stock you need to carry and the risk of being caught short. This SAE assortment offers a range of common metric thread sizes in various shapes found on more recently manufactured equipment. | *$17.99 |
 | Grip 4 Ton Hydraulic Body Repair Kit
Brand: Grip-On-Tools Model: 19060
Complete kit contains the heavy duty hydraulic equipment needed for lifting, pushing, pulling, bending, straightening, and spreading. Includes ram and hydraulic pump extension tubes, serrated saddle, v-base, wedge head, plunger, ram toes, 1/2 ton capacity jaw spreader, flat base. Includes blow mold storage case. | *$79.99 |
 | H1B , FHK Series Hydraulic, Brass Socket, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$8.00 |
| H1S , FHK Series Hydraulic, Steel Socket, 1/8 in. Female Pipe
Brand: Foster Manufacturing | *$10.08 |
| H2B , FHK Series Hydraulic, Brass Socket, 1/4 in. Female Pipe
Brand: Foster Manufacturing | *$10.08 |
 | H2DP , FHK Series Hydraulic, Brass Socket, Socket Dust Plug for 1/4 in. size
Brand: Foster Manufacturing | *$5.20 |
| H2S , FHK Series Hydraulic, Steel Socket, 1/4 in. Female Pipe
Brand: Foster Manufacturing | *$10.88 |
